Give us a call 226-828-2330
GM-Panels 120
Lifting trolleys and Stackers
Lifting Trolleys for Panels weighing up to 120 kg
The GM-Panel 120 Lifting Trolleys range for panels is the ideal mobile solution for picking up, rotating, turning and tilting wooden, plastic metal panels effortlessly.
GM-Panels enables panels to be moved indoors and outdoors over long distances thanks to its suction cups and an on-board vacuum generator.
These devices guarantee both the safety of the operators and the loads in their entirety.
- Handling panels with suction cups up to 120 kg
- Autonomous battery-powered mobile system with integrated motor
- Rotating, tilting, turning of porous and non-porous panels
Play Video
Technical information
The GM-Panels 120 Panel Stackers are trolleys equipped with a vacuum lifting device for picking up and moving porous or non-porous panels: wood, glazing, plastic, sheet metal, etc.
This device is ideal for moving bulky panels and allows them to be picked up and put down in any position: horizontal, vertical and 360° turning.
GM-Panels therefore finds its place in any environment because it can pick up and set down horizontally and vertically to feed saws or store panels on their edges. It should be noted that GM-Panels compact design and structure allow it to pick up and drop off panels under racks up to 1600 mm.
A version of GM-Panels with shortened side frames allows the panels to be stacked as close as possible to obstacles: in particular for feeding horizontal saws.
With its built-in vacuum generator, its light weight and its compact design allowing it to pass through narrow passages (corridors, doors), GM-Panels is completely autonomous and can be moved around in any environment. Equipped with high-performance batteries, GM-Panels has an autonomy of up to 8 hours. It can therefore be used on site as well as in a joinery workshop, sheet metal workshop or PVC panel manufacturer.
| Gencode | GM Pan120/90-STD | GM Pan120/180-LR-P | GM Pan120/90-STD-P | GM Pan120/180-STD | GM Pan120/180-STD-P | GM Pan120/90-LR | GM Pan120/90-LR-P | GM Pan120/180-LR |
| Dimensions of stringers - LL x HL (mm) | 282 x 85 | 282 x 85 | 632 x 85 | 632 x 85 | 632 x 85 | 282 x 85 | 632 x 85 | 282 x 85 |
| Autonomy | 100 cycles | 100 cycles | 100 cycles | 100 cycles | 100 cycles | 100 cycles | 100 cycles | 100 cycles |
| Type of batteries | 2x 12V AGM | 2x 12V AGM | 2x 12V AGM | 2x 12V AGM | 2x 12V AGM | 2x 12V AGM | 2x 12V AGM | 2x 12V AGM |
| Type of controller | Fixed and remote-controlled | Fixed and remote-controlled | Fixed and remote-controlled | Fixed and remote-controlled | Fixed and remote-controlled | Fixed and remote-controlled | Fixed and remote-controlled | Fixed and remote-controlled |
| Lifting speed | 100 mm/s | 100 mm/s | 100 mm/s | 100 mm/s | 100 mm/s | 100 mm/s | 100 mm/s | 100 mm/s |
| Power | Batteries 24V | Batteries 24V | Batteries 24V | Batteries 24V | Batteries 24V | Batteries 24V | Batteries 24V | Batteries 24V |
| Weight (kg) | 250 | 250 | 240 | 240 | 240 | 250 | 240 | 250 |
| Max lifting height - Z2 (mm) | 1600 | 1600 | 1600 | 1600 | 1600 | 1600 | 1600 | 1600 |
| Wheel diameter front-rear (mm) | 85 - 160 | 85 - 160 | 85 - 160 | 85 - 160 | 85 - 160 | 85 - 160 | 85 - 160 | 85 - 160 |
| Diameter of suction cups (mm) | 230 | 230 | 230 | 230 | 230 | 230 | 230 | 230 |
| MWA (kg) | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 |
| Spreader dimensions - L x W x H (mm) | 1540 x 1200 x 235 mm | 1540 x 1200 x 235 mm | 1540 x 1200 x 235 mm | 1540 x 1200 x 235 mm | 1540 x 1200 x 235 mm | 1540 x 1200 x 235 mm | 1540 x 1200 x 235 mm | 1540 x 1200 x 235 mm |
| Stacker frame dimensions - X2 x Y2 x Z1 (mm) | 2340 x 824 x 2052 | 1574 x 824 x 2052 | 1574 x 824 x 2052 | 1574 x 824 x 2052 | 2340 x 824 x 2052 | 1574 x 824 x 2052 | 2340 x 824 x 2052 | 2340 x 824 x 2052 |
| Overall stacker dimensions - X1 x Y1 x Z1 (mm) | 2682 x 1540 x 2052 | 2174 x 1540 x 2052 | 2174 x 1540 x 2052 | 2174 x 1540 x 2052 | 2682 x 1540 x 2052 | 2682 x 1540 x 2052 | 2174 x 1540 x 2052 | 2682 x 1540 x 2052 |
| Pivoting angle g/d | 80° | 80° | 80° | 80° | 80° | 80° | 80° | 80° |
| Tilting angle of the panel front/back | 180° | 90° | 90° | 90° | 180° | 180° | 180° | 90° |
| Max panel dimensions | 3200 x 2100 mm | 3200 x 2100 mm | 3200 x 2100 mm | 3200 x 2100 mm | 3200 x 2100 mm | 3200 x 2100 mm | 3200 x 2100 mm | 3200 x 2100 mm |
| Compatible with porous panels ? | Yes | Yes | No | Yes | No | No | Yes | No |
| Chassis model | Shortened stringers | Shortened stringers | Standard | Standard | Standard | Shortened stringers | Standard | Shortened stringers |
| Visual indicators | Battery Charge / Vacuum Meter | Battery Charge / Vacuum Meter | Battery Charge / Vacuum Meter | Battery Charge / Vacuum Meter | Battery Charge / Vacuum Meter | Battery Charge / Vacuum Meter | Battery Charge / Vacuum Meter | Battery Charge / Vacuum Meter |
Get in Touch
Let us know how we can assist you. email, call and someone will get back immediately.